There are many reasons that people choose to install a dumbwaiter in their home. Sometimes it is installed by the home builder as the home is being built. This can help to increase the value of the home and its appeal to potential buyers. Other times, the homeowner will decide to install a dumbwaiter into their home after it is built.
There are many advantages to having a dumbwaiter in the home. These devices help make it much easier to do the many chores around the home. For instance, bring groceries up from the garage, is much easier when you can simply load up the dumbwaiter car and push a button. They can also make it much easier to bring laundry to and from the laundry room. These devices can also make it much easier for caretakers who need to bring food or supplies upstairs on a regular basis.
There are several popular kits that are used today to allow a homeowner to retro-fit a dumbwaiter with ease. The electric dumbwaiter is the most common type used, but some people prefer a manual dumbwaiter instead. The disadvantage of a manual dumbwaiter is that it will only be able to support less weight than an electric dumbwaiter. Also since you must use your own power to raise or lower it, they can be rather unpractical.
When installing an electric dumbwaiter, it is necessary to do some planning first. Usually the car of the dumbwaiter, which is the part that holds the goods as they are moved between floors, takes up about two feet by two feet of space. This means you will need a vertical shaft between floors that is about 4 feet squared. This is one reason that it is easier to install the dumbwaiter as the home is being built.
In retro-fit situations finding a space can be an issue, but usually most homes have an area that will work. The car can be configured so that the door opens on different sides, so this means you could configure it to open on one side in the kitchen and a different side upstairs. This increases the flexibility of the device. Often if all else fails, a closet can usually be converted to hold the dumbwaiter.
A track is used to keep an electric dumbwaiter and the car moves along the track. Most tracks are designed so that they can be installed into a wood framed home. The track comes in sections and can be slid together. This makes it much easier and more manageable to install the track.
Some dumbwaiters are in large part already assembled. The cable drive system is already installed along with the car on a short section of track. This piece will be placed at the top of the shaft, then after the track is attached to the shaft, there is little left to the installation. Since the installation is simpler and takes less time, it will in turn cost less to install.
There are many people that choose to install a dumbwaiter in their home. These lifts make it much easier to take care of tasks around the home.
Sean is knowledgable about mobility lifting aids, like the dumbwaiter Several kits are available, such as the AmeriGlide Express, which are intended to be installed quickly and easily. A large part of this lift is actually already assembled, so that the installation can be quicker and easier. This will not only save money, but also time, because the lift can be up and running in only a few hours.
Stair lifts, another type of mobility aid are also very popular. These devices install onto a staircase and move a person along the staircase, so the risk of a fall can be reduced. In many cases, homeowners find that a stair lift ends up being much less expensive and easier to install than an elevator would be. The AmeriGlide Express actually uses the incredibly durable motor found in a stair lift This motor has been extensively tested, with a simulated 16 years of usage, and showed only a little wear, so it will provide many years of dedicated service.
No comments:
Post a Comment