Building Codes Won't Insulate the Homeowner

Wasting the hard earned money that the average homeowner takes home is not a fact that should be taken lightly and yet the majority of homeowners are losing money every day without even realizing. Even while sleeping, money is flying out the window unless the insulation in the attic has been upgraded using a radiant barrier.

Most building codes are in place to ensure the minimum requirements. Unfortunately the "minimum" building codes are laughable and poor at best. These codes provide just enough assurance to the homeowner that the structure won't collapse and will keep the rain and wind from rushing throughout. This may sound like an over simplified extreme, but essentially it's true.

Insulation in stock houses is the minimum that most builders can get by with and in some cases, depending upon how thorough the building inspector, many roofs, attics, and ceilings may not have adequate insulation throughout the entire structure. A radiant barrier is the perfect solution to help reduce the problem of excessive heating and cooling costs. With a radiant barrier lain on top of any existing insulation in the attic, temperature fluctuations can be reduced.

Many radiant barriers available, like many products now, can have their origins traced back to space age technologies and military research. The same science that has been used by NASA for astronaut's space suits is present in these radiant barriers for home and commercial buildings. This radiant barrier insulation doesn't allow heat to penetrate and pass through into the living area like traditional spun fiberglass insulation. It actually reflects the outside temperature allowing the interior temperature to be maintained with minimal heating or cooling.

This will be of great benefit for anyone concerned with saving money and electricity or gas. By reducing the need to cycle your heating and cooling system on and off as often, the homeowner will save wear and tear on the equipment as well as their hard earned income. Over a year's time and with energy costs consistently on the rise, the savings will add up. This will be an investment that will truly pay for itself with savings.

For more information and guidance about energy efficiency and radiant barriers such as Temper Shield, visit http://www.utilityimprovements.com. Utility Improvements specializes in exceptionally effective thermal radiant barriers and demonstrates how they work via videos on their Website.

Daniel Elliott is an independent contractor who authors articles and media on a variety of topics for diverse audiences. WebDrafter.com, Inc. (http://www.webdrafter.com) produces Website design, hosting, and search engine marketing services for many of the clients, industries and markets related to the articles and media authored by Dan Elliott. If you would like Dan Elliott to ghost write or pen an article for you or your company, please contact him with your specifications.

Easy For Estimators to Produce Cost Projections

A building construction software program has become one of the most important tools in the construction profession. These programs have made it easier for estimators to produce cost projections; for architects to develop a building design; for contractors to plan for building codes and other legal concerns; and for the homeowner or building owner to get an idea of what the project would entail in terms of costs, time and compliance.

Types of software

A construction project is made up of various steps, so it is to be expected that software packages for this profession will be numerous and varied. One of the more widely-used types is the computer-aided design or CAD software that is used mostly by architects and engineers. These types of programs are used for creating building plans and drawings and allow the designer or architect to have a three-dimensional perception of the project at hand.

Software programs for estimating construction costs are another of the more commonly used packages in the building trade. Programs for estimating building costs allow the user to produce expense approximates, employee and equipment scheduling plans, contractor bids, project reports and other elements of the project that have something to do with costs. These software packages can be purchased, but there are also those that are available for free in the Internet. However, free programs are mainly basic in terms of functions and can only provide rough estimates.

There are also programs for accounting, which help in keeping tabs of the costs of the project and provide bookkeeping information; software for environment and energy compliance concerns; programs for project contracts; and software packages that guide the owner and the builder through building codes and legal issues associated with a construction project.

What to look for in a software program

For those who are not very familiar with using CAD or other building trade software packages, it is important to choose the ones that are easy to use and can provide information that is not too muddled with unnecessary jargon. In buying software for a building project, look for brands that provide specific information about costs, plans and designs. The various screens should also be easy to understand, which means that they provide detailed information in the simplest language possible. The steps that it would take for a software user to perform basic actions should also be considered - the fewer, the better.

Building construction software products have revolutionized the architecture and construction industry. Whether you're a home owner or a builder or an architect, getting yourself familiar with these modern tools will go a long way towards helping you have a successful building project or a well-designed, within-the-budget home.

Read more information about Construction Estimating Programs and assessing construction costs of projects at http://www.construction--estimating.com

Precast Concrete 101 - Home Remodeling

Unless you are a precast concrete manufacturer, you probably don't fully understand the difference between using concrete over other building mediums. Concrete is perfect for structural building because of its efficiency, strength, durability and resistance to the elements.

Since the days of ancient Roman builders, concrete has been used for basic structures. The Romans used concrete to build their complex infrastructure of tunnels, aqueducts and culverts. Today concrete is used for building foundations, storm and sanitary sewers, septic tanks, electrical and communications vaults and for a variety of other purposes.

Precast concrete refers to a construction process where contracts is cast in a reusable mold or form. The concrete is them cured in a controlled environment so it can be transported to the construction site and lifted to its ultimate destination. The process differs from using standard concrete, which is poured and cured on site.

Many different forms exist for precast construction based in different architectural applications. Concrete is the perfect material for safety, health and even protecting the environment. For this reason, more San Jose precast concrete contractors are using this material for projects of all sizes and functions.

Concrete is structurally sound and actually gets stronger over time, rather than deteriorating like many other building materials. The serviceable life of concrete can last up to 100 years or longer. Concrete is even resilient and durable enough to use for highway barriers.

Another benefit of concrete is its resistance to the elements. It is noncombustible and does not quickly lose its structural integrity under high temperatures. Concrete also withstands corrosive agents and chemicals. The UV rays from sunlight will not degrade the composition of concrete. From the hottest summer days to the coldest winter freeze, concrete stands up to all weather conditions.

Because precast concrete is already cured, construction is not as dependent upon the weather conditions. It takes less time to install so contractors find it easier to stay on schedule. This type of concrete can also be installed on demand.

Precast concrete is easily used for large projects because of its modular nature. All kinds of systems and structures are put together with ease. The products arrive at the job site ready to install. Its availability ensures a ready supply and fair pricing so the construction project is completed more efficiently.

Structures made from concrete are also watertight and airtight. High quality sealants are used along with seamless construction patterns so water and other airborne elements will not compromise a concrete structure.

Whether you're a homeowner or a large corporate mogul, concrete buildings and structures offer superior security and durability at an affordable price. With a variety of aesthetic options, concrete is the most versatile, reliable building medium around.

If you want to learn more about precast concrete visit a leading precast concrete manufacturer website to find out more. JensenPrecast.com is a leader in the San Jose precast concrete industry offering a wide variety of solutions for infrastructure projects of all kinds

Follow Your Instincts When Looking For a Contractor

One of the most popular search terms on the Internet is the word "contractor." People are searching on how to find good ones, recommendations, reviews, and information to back up who the contractors actually say they are. The largest global topic about contractors is "how do I find a good one?"

If you're looking for a contractor, or have recommendations or names, the first step in getting to know someone who's going to be doing work in your home is to call them.

When you call them, set up a sit down conversation about your project. Remind them to bring their license numbers and credentials. Having them provide pictures of past jobs only helps you to see their individual style and how it might coincide with yours. This first meeting is for them to get an idea of the job and for you to feel out your reactions to them being in the home.

My first rule with this is simple: Trust your gut.

If you get a funny feeling having the person in the home, most likely it's not someone you're going to trust to have there and in the long term this can and will cause problems. Not only will they feel like you're trying to "watch their every move" through the whole project, you'll be uncomfortable with the whole process. Avoid this at the beginning, smile and nod, and kindly say "I don't think we're going to be a match."

Second rule: Once you find a contractor you get along with check their license number against the state records.

Simply put, there are many capable people out there who are trained to do your home improvement job the right way. There are also many capable people who don't really follow the rules. To further narrow down the field of people you're going to let do work in your home, compare their contractor license number against state records.

You can easily do this on most State's Public Safety Department websites as well as over the phone. This information will let you know who's up to date, keeping certified and if "everything is in order." Not to say that people who are carrying out of date license numbers are bad, but it means that the state won't protect you against something that goes wrong in the case that something does in deed go "off-plan".

Always trust your gut and always check the information they give you. Just two ways to keep yourself protected, prepared and on your way to finding the right contractor for your job.

Jacob Lee - pioneer basement
http://www.pioneerbasement.com

Leveling Your Floor - Home Repair Tips

If you've ever been in a building where you feel like you are getting pushed to one side and you can't seem to stand up. You have either been drinking too much alcohol or the floor could be sloping. I was just in a store the other day that was full of antiques and glass but I could hardly stand up because the floor was sloping enough to create what I would consider a liability issue to the store owner.

Sloping floors are not going to be that easy to fix and repair. Repairing these floors will require a little skill and it would be a good idea to hire a professional to repair the damage. This is not going to be a simple fix and this is probably the main reason most people never choose to fix their sloping floors.

Fixing these floors will require either pouring a new concrete slab, replacing the wood floor framing members or replacing the actual building foundation itself. No matter how you look at it the sloping floor is going to be a costly item to repair.

What causes a sloping floor? Termite damage or dry rot destroying the wood framing or it could be as simple as a water leak over a long period of time causing the building foundation to sink and become out of level. Poor soil conditions with either too sandy or an expansive clay soil could be the culprit also.

Sloping floors can be damaged from incorrect landscape drainage. This would involve water settling around the foundation of your home and over a period of time the weight of the house along with soil problems can create the building to start sloping to one side.

The number one contributor to a sloping floor again like most damage done to a house is going to be water. Do your best to keep the water away from the house using roof gutters and landscape drains. These items are relatively inexpensive compared to the costs involved in repairing sloping floors.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs books and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Find out more about Water Damage.

Patio Enclosed For Living Area

Real Savings With Artificial Stone - Decorating

Home builders today are challenged as never before to deliver quality homes at affordable prices. The current economic climate -- reduced access to credit, lower prices, and nervous investors -- means builders must compete in a tough buyer's market. It's essential to reduce costs wherever possible.

Yet, home buyers still demand top quality and enduring beauty.

Increasingly, builders are solving this dilemma by taking advantage of modern materials like artificial stone veneer, sometimes referred to as a stone facing, manufactured stone, or faux stone. This remarkable material makes possible fresh and innovative designs, greater flexibility, and reduced costs, all adding up to the ever-important curb appeal that attracts qualified buyers.

Out With The Old

Traditional brick is a proven building material and has been used for centuries. But it is also expensive, both in its initial cost and in the added costs of shipping, masonry labor, and reinforced foundations required to support its extra weight.

To counter these drawbacks, builders have lately turned to vinyl siding, drawn by its cheaper cost, lighter weight, and easier installation. But these advantages are not enough to overcome a major drawback: the tendency to use the siding in unimaginative, even boring designs.

The popularity of brick and the convenience of vinyl siding has inhibited creativity and led to a rash of new subdivisions filled with repetitive designs that look as if they all came off the same assembly line. Limiting themselves to these conventional materials means many builders miss opportunities to attract new and design-conscious buyers.

In With The New

Countering this trend, savvy builders have discovered the range of possibilities provided by artificial stone veneer. Modeled after natural stone and virtually indistinguishable from the original, artificial stone veneer is manufactured from a formulation of Portland cement, natural aggregates, and carefully selected pigments. Durable, light weight, and easy to work with, the material can substitute for wall stone in both interior and exterior projects ranging from chimneys and fireplaces, to fences, pillars, stone walls, and stone facings.

There is also the option to add stone veneer to popular traditional materials like wood siding, stucco, and board-and-batten, giving your home a custom-built look at affordable prices. Now, in combination with stone veneer accents, these techniques make possible unique designs that are more attractive then vinyl siding and less expensive than traditional brick.

Solid Savings

Using artificial stone veneer instead of traditional brick leads to remarkable savings. Besides the lower cost of the product itself, artificial stone veneer's light weight means a substantial reduction in the cost of shipping, labor, and foundations and footings. For example, builders can easily achieve a savings of between $1,700 and $4,000 (Canadian) on an average-sized detached home.

When selecting a vendor for artificial stone veneer, it's important to look for a company with both a superior product and a solid reputation. For Canadian builders, Stone Selex satisfies both requirements.

In addition to its existing product line from Artistic Stone, Stone Selex is now an authorized distributor for Canyon Stone, giving customers -- builders and renovators alike -- even more options for creating stunning stone designs to attract buyers and increase the value of a home. For your security, they offer a 50-year warranty on every stone they sell, keeping you covered for generations to come.

Contact Stone Selex to find out more about how you can achieve real savings with artificial stone.

Jerry Lebiedzinski is the President of Stone Selex, a premier supplier of artificial stone wall and manufactured stone in Canada. Visit Stone Selex at http://www.stoneselex.com for the best options in manufactured stone veneer

Building Projects With Treated Wood - Home Remodeling Ideas

Building with treated wood and the idea that this project will last forever because of the wood you used is not necessarily true. Over the years I have seen contractors and homeowners use treated wood for projects like building decks with this idea in mind.

I just met with a homeowner that was asking me about vinyl fencing. The homeowner approached me with some facts about vinyl fencing. She started to explain to me how long a vinyl fence would last verses a wood fence. I reminded her that the vinyl posts usually slip over metal or wood building materials.

She proceeded to inform me that treated wood will last a lot longer than wood used when building a wooden fence. It took me a while to change her mind and reprogram her with a few picture this from my website. I know this is hard to imagine but wood rots and steel rust.

All you end up with is a vinyl fence that is in pretty good shape if taken care of properly laying down in your yard with broken or rusted fence posts.

Do you know that some people use treated wood for countertops and food preparation areas when building certain projects like an outdoor barbecue? Do you know people build outdoor furniture with treated wood and then sit in it with a chance of toxic chemicals entering into your body? This is where Redwood comes in as a natural building product or other nice looking woods. Redwood is classified as a softwood and if used for a countertop and a barbecue kitchen area you will have to protect it from heavy pans and people using the countertop for a cutting board.

Do not use treated wood for a projects that will be used for food preparation later.

It's a good idea to wash your hands after handling treated lumber. It's a really good idea to wash your hands after using treated lumber if you are going to eat something or make something for another person or yourself.

For all the homeowners and building contractors that use treated wood and bury it in dirt. Or build a low lying deck right above the ground I would like to share something with you. I have been repairing and replacing your work for over 30 years now. You guys keep me busy and I want to thank you for all the years you guys have been in business.

I still can't believe the amount of work I see being done using treated wood with the illusion that it will last longer than regular construction standard wood. I don't know how else to put it except to say treated wood will rot fast in the right conditions.

Treated wood does need to be protected from rain, snow, heat and other elements of the weather. It cannot sit in the dirt or lay in water for long periods of time without slowly disintegrating. Oh yeah one more thing termites will eat sections of the wood that is not completely treated.

Use treated wood properly when building and inform other people about some of the stuff you learned in this article. Reread this article later and save it for the future.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more Building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on building and remodeling your homes and Vista Structural Home Repairs

Concrete Patch Next To House