Wood Does Rot - Home Repairs and Advice

Let me give you some advice right now," All Wood Rots Eventually". I have heard it all when it comes to this wood or that wood lasting this long or that long........ Hello....... All wood is going to rot at some period of it's life.

With that out of the way we can focus on some wood seems to last a little longer under certain conditions.

Teak is a wood that has a lot of natural oil in it. But you won't frame a house with it. Teak is used on boats and expensive outdoor furniture. It is a excellent wood to use when building a ship. The woods natural oils seem to create a protective barrier around it allowing it to last a long time even at sea. Great wood for the outdoors...

Oak is a excellent choice for almost every wood finish inside your home. It is used for kitchen cabinets, entertainment centers, flooring, trim and furniture. Oak is a hard wood and can take a lot of abuse from almost anything except water. I have seen a nice piece of furniture get stained from just setting one glass on it for ten minutes. Great Wood For Inside Your Home.

Poplar is also a great choice for inside your house. This wood is used by many finish carpenters for making cabinets and other built ins for your house. It is also popular not poplar for wood trim . Most of the poplar that is used inside of your home will eventually get painted. So that makes poplar a inexpensive choice of wood for homeowners that want a nice painted finish on their interior wood projects. Great Wood For Inside Your Home.

Douglas Fir is the most common source of lumber used on the west coast of the United States. This is a extremely durable wood product. On the East Coast they use southern pine and the nominal thickness is usually two inches by four inches for a 2 x 4 . With Douglas Fir a 2 x 4 is one inch and a half by three and one half inches to support the same weight structurally. In my opinion one of the best home framing materials.

Douglas Fir can and has been for a long time now. A great source for clear finish materials used inside of the house. You will see a nice orange or brown looking piece of wood stained naturally in some older home. This is Douglas Fir. It can be a bit pricy but really gives a log cabin look to your home.

Redwood is a great choice for inside or outside your home. I love Redwood it has a nice look to it stained naturally. Redwood is used for a lot of siding, fences, decks and out door furniture. The main problem with Redwood is that is is soft and will get scratched easily. Now for the facts about Redwood. It does rot and termites will eat it.

Wood myth number one eliminated. I have heard stories about wood that termites won't eat. Well Redwood is not one of them. I have seen termites tearing this stuff up. Don't get caught up in the hype that this or that wood will last for 5 years or 50 years. Under the right conditions almost all woods will rot at a accelerated rate.

For more information on wood damage, check out wood repair at http://gregvan.com/wood_repair.htm

Copyright 2008 Greg Vanden Berge All Rights Reserved

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs books and adding useful content to help solve problems created by the lack of construction knowledge in the building industry. Few Home Remodeling Rules

Roof Protected With Plastic
Plaster Over Brick Damage

Whole House Water Purification is a Necessity For Safe Home Water

I believe that whole house water purification is a necessity for anyone, but in some areas in the US and around the world, the need is grave. In an effort to provide safe home water to the general public, treatment facilities rely on chlorine and other chemical disinfectants.

These chemicals become vaporized in the shower, when doing laundry, when running the dishwasher and even when flushing the toilet. Chlorine vapors are toxic to the central nervous system. Chlorine gas was the earliest chemical weapon, used in World War I by Germany. It can react with water in the lungs to form hydrochloric acid, which is lethal.

Effective whole house water purification removes more than 99.99% of chlorine. The way to do that was discovered in World War I, when gas masks containing carbon granules were used to protect soldiers from the gas, which is also known as bertholite.

You cannot have safe home water, without effective chlorine-reduction. It's simply not possible.

In the shower, chlorine damages the hair and skin. It causes skin conditions like eczema and acne. At the very least, showering in chlorinated water causes dryness and itching. So, you need safe home water in the shower, as well.

You could get a showerhead system and a kitchen faucet filter, but without whole house water purification, your ice cubes will have chlorine in them and you'll still be exposed to the vapors in other ways. In addition, when chlorine reacts with bacteria on the skin, chloroform gas is formed. Chloroform is listed as a probably human carcinogen by most agencies. Some list it as a "known" carcinogen. It is also created when chlorine reacts with popular antibacterial soaps.

We use those soaps to wash our hands, to wash our bodies and to do dishes. Some laundry detergents even contain triclosan, the most popular antibacterial agent. You can either stop using antibacterial soaps or insure that you have safe home water with whole house water purification.

If you did decide to go with faucet filters and showerhead systems throughout your home, you would find that it cost more and was more time consuming to keep up with replacement filters for all of those different systems. You may spend more initially, but you'll end up paying more in the long run.

And, isn't your time valuable? I know that my time is money. I can't afford to waste a lot of time changing filters throughout the house. Plus, they just don't look that great. There are not many products that will even fit on a small bathroom sink.

If you choose the right system, installation can be quickly conducted by any certified plumber. Believe me, once you have safe home water throughout your house, you'll start to have more energy, fewer headaches and a better-functioning digestive system.

If anyone in your home suffers from asthma, whole house water purification is an absolute necessity. Swimming pool experts have known for years that chlorine vapors trigger asthma attacks. It aggravates other respiratory conditions, too. Shop for effectiveness and you'll get more value for your money.

Click Here to learn more about the best home Water Purification Device that can provide an unlimited amount of safe home water for you and your family

Tyler Waterman is a health enthusiast and enjoys sharing his experience and research with others on the internet. Visit his site for additional information on this important safe and healthy water topic

Install Ceramic Wall Tile in Your Bathroom - San Deigo Home Tips

It's not that difficult to customize and install ceramic wall tile in your bathroom. A little patience and dedication will get you a long way when installing that dream ceramic tile bathroom wall you've always wanted to have.

Before you begin to install ceramic wall tile, get your tiling tools together. You will need the following tools for this project: A tape measure, a tile cutter and a pair of tile nippers and a pair of pliers, tile spacers, sandpaper, a trowel (preferably notched) and a rubber grout float. To install ceramic wall tile on your bathroom walls properly, you will also need a strong setting material like tiling thinset mortar, or any of a wide selection of tile adhesives. You will also need tiling grout for filling in the gaps between your tiles. Make sure to match your setting material color with your grout.

A bucket, rags and sponges will also be needed for cleaning your tiles of excess grout and other debris, after you're all done. And don't start to install ceramic wall tile without these essentials: You will also need a pair of safety glasses, heavy leather gloves, and long-sleeved work clothes (broken shards, and other debris can cause nasty cuts, if you are not careful). Ready to start on your dream ceramic bathroom wall? Follow the tiling instructions below and make your ceramic tiled bathroom wall and start tiling!

You can begin by finding the center of your wall. Use a carpenter's level, or long pieces of plumb to mark intersecting vertical and horizontal lines. These will be your reference lines for your tiling work. Where both lines intersect is the starting point for your first row of ceramic tiles. From that point, you may then be able to working your way to both ends of your bathroom wall. Make regular checks when you install ceramic wall tile, so that your tiling work is consistent and does run up or down in a slanting direction.

There are two types of bathroom walls you may be working on. One is the common concrete wall, and the other is a special type of called a green drywall. A green drywall is specifically designed for use in bathrooms and showers because it is designed to resist moisture intrusion. Be sure that you clean your walls of dust and debris, as well as repair cracks and fill in gaps and holes. Roughen up or scarify your wall so that your tiling mortar has some grip for bonding. That way, when you begin to install ceramic wall tile on your walls, you won't have a problem with your tiling mortar or bonding material.

You may now start installing ceramic wall tile once the walls are laid out. Start at your reference lines' intersection point. Apply a coat of tiling thinset mortar. Place your tile over it and press the tile down firmly in place. Give it a twisting motion to set it in place. Stop pressing when you feel your tile has set and is no longer wobbly. Duplicate this procedure with the rest of your ceramic tiles. To get a consistent tiling, place tile spacers on all the spaces between your ceramic bathroom tiles. Don't forget to check your work every now and then.

You may not need to use the entire tile as you finish up the end of the row. Use a tile cutter to get your tile under the right size. Then, smoothen the cut edge with sandpaper. Be careful: The edge of a cut ceramic bathroom tile is very sharp. For irregular, use your tile nippers. First draw an outline of the irregular and etch a line along it. Then, use your tile nipper to break off the unuseable edges, until you have required shape. Do this a little at a time, so you can control your tile nipping. Don't forget to sand the edges over.

Once you're done tiling the bathroom wall, leave it to set, overnight, at the very least, or twenty-four hours, at the most. After this setting period, it's time to lay in your grout. There are two main kinds of grout: Sanded or unsanded grout. Sanded grout is a mixture of cement, water and fine sand. Unsanded grout is any of a wide selection of polymer-based and epoxy resin adhesive grout used to install ceramic wall tile. If your tile spaces are more than an eighth of an inch wide, use sanded grout. For smaller tile spaces, use unsanded grout. Start by map out your bathroom wall and work one section at a time. To maximize your grout application, angle your rubber grout float and press down firmly as you spread it over the tile spaces. Check for pockets of air. Dab these spaces with more grout lining by using the edges of your grout float. Use a damp sponge to wipe off any excess grout. Rinse your sponge regularly so you can get a cleaner and better finish. Let your grout dry for a day and then take a dry piece of cloth and clean and buff your tiles.

Before you know it, you're done! Follow these instruction on how install ceramic wall tile, and don't forget that ceramic tiling takes some dedication and patience. Take your time and don't rush your work. When you install ceramic wall tile, the key is consistency and patience. Ceramic tiles that have been rushed will ruin your bathroom's overall look. A bathroom wall with ceramic tiles that run in haphazard inconsistent zigzag lines is not a beautiful thing to look at. And worse, it would only mean that you lack enthusiasm for what you're doing and that you haven't given it your effort.

You don't have to be a master tilist to install ceramic wall tile in your house. All you have is the best ceramic tile installation instructions.

What Does a GFI Do

In your bathroom you should have a GFI electrical outlet. Most new homes or newly remodeled homes require you to have GFI electrical outlets in the kitchen. Most older kitchens do not have GFI electrical outlets. GFI stands for ground fault circuit interrupter.

Why not call it a GFCI instead of a GFI electrical outlet? Well it is called a GFCI in some instances. GFI is short and is the most common name used by most electricians and builders for this type of outlet.

GFI 's come in 15 amp and 20 amperage outlets. GFI outlets must be wired properly. Make sure you're using the proper wire size when hooking up the GFI outlet.

How do I know which size wire to use? This all depends on how far away you are running it from the electrical panel. There are charts you can use to figure this out. If you are not running the electrical wire more than 80 feet from the electrical panel you can use 12 gauge electrical wires for a 20 amp GFI. This is a general rule of thumb for most electrical house wiring.

If you're going to be using a 15 amp GFI and you are going to be less than 80 feet away from the electrical panel you can use 14 gauge electrical wires. Again this is just a general rule of thumb for most electrical house wiring.

A GFI is a light duty electrical plug used in bathrooms, kitchens and the exterior of your house. The sole purpose of the GFI is to shut the breaker off faster if there is any moisture or light load problems.

Let's say for instance you have your hair dryer plugged into the GFI outlet. The hair dryer somehow falls into the sink while it is on or plugged in. The GFI outlet will instantly shut off because of the sensitivity of the breaker inside of the plug it self.

The GFI plug has a test button and a reset button on it. If you are continually resetting the GFI you will wear it out eventually. I have had GFI plugs after resetting the button about 10 times break and no longer able to use them.

The GFI electrical plug is a great idea and if you don't have them in your bathroom or outside of your home it would be a great idea to have an electrician install them for you.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more Home Building Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

San Diego Termite Damage

Brick Design With Oozing Grout

Window Header Framing Problems - Building Problems

As a building contractor it is my job to assemble the house to meet the specifications from the architect and the structural engineer. I do this by looking at the building plans and installing the specified lumber sizes. I can take it upon myself to install a larger size wood beam or window header adding an additional cost to the job of course. I don't think so.

It's not uncommon for a framing contractor that has an additional 5 foot scrap piece of 4 x 8 left over that he now has no use for. He can then choose to use the 4 x 8 instead of a 4 x 6 for the window header. This type of building is common and acceptable.

If the structural engineer calls out for 4 x 6 window and door headers do not take it upon yourself to replace the 4 x 6 with a 4 x 4. I have seen too many framing contractors or carpenters make an on-the-job judgment like this.

A good example would be a single story house with 2 foot wide windows that require a 4 x 6 window header. As the carpenter builds homes over the years he can come to his own conclusion that a 4x4 will work fine for this application. Again keep this in mind as a framing contractor and a carpenter you are assembling the home not designing it.

Do not change the sizes of any headers or beams.

A long time ago carpenters used a standard rule of thumb, you could go up two sizes larger than the window opening for your header. Let me give you an example of what I'm trying to explain.

A 4 foot wide window opening would require a 4 x 6 window header. A 6 foot window opening would require a 4 x 8 window header. This should give you an idea of what I mean by going up two sizes larger than the window opening to figure out the lumber necessary to use for your window header.

This rule of thumb does not necessarily apply in today's building industry. The reason for this is structural changes from earthquake damage. The structural requirements that are required for building a home require a lot more metal bracing and strapping. Therefore some of the lumber requirements for beam sizes and window headers will be different.

This message is for general contractors, framing contractors and carpenters. When installing a window header and you take it upon yourself to change the size you also assume the responsibility if the building fails. This type of mistake is common and you guys know what I'm talking about.

It's not worth it. Keep in mind you are the assembler and not the designer of the building you are working on.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more Building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on building and remodeling your homes and House Framing Structural Repairs

Home Inspection Books

Lemon Juice As a Natural Cleaning Product

One of the most popular cleaning products is lemon juice. Lemon, aside from being a very healthy citrus fruit, also makes a very good household cleanser. This is because of the acidic content found in its juice.

There is myriad of ways of how to use lemon juice as a green cleaning product. It can be used as a stand-alone - which means that it can clean areas in the home just by itself, not combined or mixed with other products. Also, lemon juice makes a very good ingredient in natural cleaning solutions that you can make at the comfort and safety of your very own home.

There are so many reasons why you should opt for lemons as a part of your household cleaning regimen. The smell of lemons has already been closely associated as the scent of cleanliness. There are so many cleaning products that are sold commercially that mimic the smell of lemons for the buyers to enjoy. However, nothing still could match the natural smell of fresh lemons.

Lemons are naturally acidic. The natural acids that they have are one of the major reasons why they are considered good green cleaning products. The acid provides antiseptic and antibacterial properties to be used for cleaning.

So how do we clean with lemons? What are the household problems that we can solve using these natural cleaning products?

Copper

You can clean pots and pans made with copper using lemon juice. Copper-bottom pans can easily be transformed into spotless clean bottoms in no time with lemon juice. Other materials that are made of copper can also greatly benefit from a thorough and proper cleaning power of lemon juice extracts. All you have to do is cut the lemons in half. Dip the half in a little table salt and you can use that half to rub on the copper fixtures or copper pots.

Countertop Stains

Stains in countertops can easily be removed by letting lemon juice sit on the countertop stains for a few minutes. The minutes can range from 15-30, depending on the size of the stain and on how stubborn it is. After waiting, you can scrub the affected area with baking soda. The cleaning combination of baking soda and lemon can easily erase these stains, leaving your countertops looking brand new and spotless clean.

Drains

Lemons also make a great household deodorizer. You can freshen the drains in your home through lemons. Lemon rinds can be placed in the garbage disposal area in order to make that area smelling fresh and clean all day, every day. You can also add a few drops of lemon juice into hot water and use this solution to pour down the drain. These technique can help clean and leave your drain smelling fresh.

Bleaching

Lemon juice, with its acidic property, also acts as a powerful natural bleaching agent. You can place lemon juice in your white cloths, clothes and other fabrics and let them dry out in the sun. This technique is effective in removing stubborn stains away from your clothing and also has a very efficient and powerful bleaching effect.

Vinegar Smell Neutralization

Vinegar is another known natural cleaning product. But some people don't like using vinegar because of its awful smell. This is when lemon juice comes in. You can add a few drops of lemon juice into your vinegar solution to neutralize the strong smell of vinegar. Lemon juice will not just take away the vinegar odor, it can also add a nice citrus smell that you will surely love.

Lemon juice is a good green cleaning product. Discover other natural cleaning products that you can use right from your kitchen cupboards.

Lemon Juice As a Natural Cleaning Product

One of the most popular cleaning products is lemon juice. Lemon, aside from being a very healthy citrus fruit, also makes a very good household cleanser. This is because of the acidic content found in its juice.

There is myriad of ways of how to use lemon juice as a green cleaning product. It can be used as a stand-alone - which means that it can clean areas in the home just by itself, not combined or mixed with other products. Also, lemon juice makes a very good ingredient in natural cleaning solutions that you can make at the comfort and safety of your very own home.

There are so many reasons why you should opt for lemons as a part of your household cleaning regimen. The smell of lemons has already been closely associated as the scent of cleanliness. There are so many cleaning products that are sold commercially that mimic the smell of lemons for the buyers to enjoy. However, nothing still could match the natural smell of fresh lemons.

Lemons are naturally acidic. The natural acids that they have are one of the major reasons why they are considered good green cleaning products. The acid provides antiseptic and antibacterial properties to be used for cleaning.

So how do we clean with lemons? What are the household problems that we can solve using these natural cleaning products?

Copper

You can clean pots and pans made with copper using lemon juice. Copper-bottom pans can easily be transformed into spotless clean bottoms in no time with lemon juice. Other materials that are made of copper can also greatly benefit from a thorough and proper cleaning power of lemon juice extracts. All you have to do is cut the lemons in half. Dip the half in a little table salt and you can use that half to rub on the copper fixtures or copper pots.

Countertop Stains

Stains in countertops can easily be removed by letting lemon juice sit on the countertop stains for a few minutes. The minutes can range from 15-30, depending on the size of the stain and on how stubborn it is. After waiting, you can scrub the affected area with baking soda. The cleaning combination of baking soda and lemon can easily erase these stains, leaving your countertops looking brand new and spotless clean.

Drains

Lemons also make a great household deodorizer. You can freshen the drains in your home through lemons. Lemon rinds can be placed in the garbage disposal area in order to make that area smelling fresh and clean all day, every day. You can also add a few drops of lemon juice into hot water and use this solution to pour down the drain. These technique can help clean and leave your drain smelling fresh.

Bleaching

Lemon juice, with its acidic property, also acts as a powerful natural bleaching agent. You can place lemon juice in your white cloths, clothes and other fabrics and let them dry out in the sun. This technique is effective in removing stubborn stains away from your clothing and also has a very efficient and powerful bleaching effect.

Vinegar Smell Neutralization

Vinegar is another known natural cleaning product. But some people don't like using vinegar because of its awful smell. This is when lemon juice comes in. You can add a few drops of lemon juice into your vinegar solution to neutralize the strong smell of vinegar. Lemon juice will not just take away the vinegar odor, it can also add a nice citrus smell that you will surely love.

Lemon juice is a good green cleaning product. Discover other natural cleaning products that you can use right from your kitchen cupboards.

Transform Your Bathroom - Home Tips

When you don't have room in your budget to completely renovate your budget, it is amazing what installing a new bath vanity will do for the look and feel of this room of your home. The simple task of changing the cabinetry in the bathroom will make it look as if you have redone the whole room. Simply adding a few different accessories, such as changing the color of the towels of the shower curtains will enhance the effect.

A bath vanity does not have to be an expensive proposition with the many styles of discount vanities available. You do have to look at the size of your bathroom so that you get a vanity that will suit the space you have. For example, adding a large vanity to a small bathroom will make the room look crowded.

The vanities available in MDF are not expensive and require assembly. However, the detailed written and visual instructions that are included will make the assembly quite easy. Even the tools you need to put the various pieces together are included. All you have to buy extra is the sink and countertop, but there are some models that have this included as well.

The bath vanity is the central focus of a bathroom. This is where you will spend time grooming yourself in the morning before you go to work and when getting dressed to go out at night. You do need to have drawers and shelves where all your grooming aids are close at hand.

You can blend the old with the new by using an antique style that has a wash basin type sink that sits on the countertop. You can choose from a wide variety of colors, but the best rule of thumb to follow is to have a vanity that is of a neutral color. You can add contrast in the faucets and colors of linens that you use.

You do have to make sure that the bath vanity of your choice is sturdy and durable. You will not save any money by buying a vanity that is really cheap only to find that you have to replace it in a few years. A lot of the furniture manufactured today is eco friendly using glues that will not emit any harmful fumes into the air when they come in contact with water.

Even the smallest bathroom can have an elegant bath vanity or even a glass sink. A stone vanity, for example, can measure only two feet wide and will make a bold statement in your bathroom as well as make it look larger than it is. A vanity made of stone with teak cabinetry inserted in the center is also a viable option if you are looking for durable construction that will last for many years to come.

When you shop for a new bath vanity you can do so in many different ways by focusing on any of the following aspects:

Size

Shape

Material

Price range

Obviously the price will be the bottom line for you, but you will find that there are vanities to suit every taste. Browse the sites of the many online retailers just to get a glimpse of the wide assortments you can choose from. This will give you ideas to work with when you are contemplating making changes to your bathroom.

Allison Ryan is a freelance marketing writer from San Diego, CA. She specializes in home remodeling and interior design. For a beautiful bath vanity or glass sink for the bathroom of your dreams, please visit http://www.mybath.biz/.

Bathroom Remodel Investment If Selling

When you're planning any bathroom remodel, consider the costs of the bathroom remodeling versus the return on the actual investment. According to one of the popular remodeling magazines, the average bathroom remodel throughout the country cost around $16,000.

If you were to sell your house within a few years, you could recoup around $12,000 of your original investment. This would translate into a $4000 loss to your pocketbook eventually.

Using these numbers for your bathroom remodel investment, you would recoup around 75% of your original investment. If you know anything about investing money, this will not be a good rate of return and if you keep investing your money like this, you won't have any to invest, eventually.

Keep this in mind, if you're going to be selling the home within a few years. If the bathroom isn't in good shape and you're not planning on selling soon, you could remodel the bathroom and enjoy it for quite a few years. You wouldn't be looking at this as an investment but as maintenance costs.

If you need to remodel the bathroom, because it's getting a little run down and will create a problem when selling a home, I would suggest minor remodeling, if the toilet, fixtures and bathtub is in good condition, I would suggest changing the sink, cabinet, bathtub surround, flooring and some new paint.

If you're remodeling cost is now at $8,000, you would recoup at least $6,000 and would only lose $2000 on your original investment. Now this still doesn't make any sense, if you're still losing money, why would you even want to remodel the bathroom. Why not sell the home as it is and not lose any money? This is a tough decision to make and keep in mind, these are average costs.

You could recoup less or more than 75% of your bathroom investment costs.

Most real estate professionals will advise you to remodel the bathroom for two reasons, for one the house will sell for a few more dollars, and this will increase their sales commission. The second one is probably the most important for any one selling a home, the home could sell faster.

If you have the time and are in no hurry to sell the home, I would suggest trying to sell the home as is first and then sprucing it up, if you can't sell it within three months.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

If your looking for some more House Remodeling Pictures or home building ideas.

Solar House Books

Is Your Real Estate Agent in a Hurry?

If any of these statements sound familiar to you, it could mean that your real estate agent is either in hurry or doesn't have an answer to your question. Either way, this could lead to an unpleasant relationship.

Have You Ever Heard the Words:

Don't Worry about a Thing, Will Take Care of You.

Come on That Roof Will Last for Another 30 Years.

I Wouldn't Worry about That, That's Easy to Fix.

How Many Times Do I Have To Tell You, It's Not a Problem.

I'm on Your Side, There Won't Be Any Problems.

With a Little Bit of Caulking, You Won't Even Notice It.

Just Plant Some Bushes in Front of It and You'll Never See It.

The Floor Squeaks, That Gives the House Character.

Or What about the Ever Famous, Are You Going to Buy the House or Not.

Are any one of these experiences familiar to you? Don't be afraid to ask your questions again. Be firm when asking, but please don't be rude and if the answers don't sound right ask someone else to verify or ask your real estate professional if they are positive and know for a fact their answer is correct. It's always good to get a second opinion anyway.

You don't need to do business with anyone that will not answer your questions and is always trying to hurry you along. If you sign a purchasing agreement with a real estate professional you're not getting along with, ask them to let you out of the contract.

With no fees of course, there are other ways to purchase a home if your now old real estate agent doesn't want to play fair.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a home buyers guide to take some of the frustration out of home shopping

If you're having problems with your real estate professional, you might give some thought to look in at some home foreclosures, and then contacting someone to help you, after you have found the home that you are looking for. Some real estate agents can be extremely unhelpful

Home Remodeling Facts

How Hot is Your Kitchen

The kitchen is a feisty place, a place of sizzling, burning, searing, and grilling, with the whistle of steam and the crackle of oil all combining to create a symphony that's so good you can taste it.

But how hot is your kitchen in actuality? I'm not talking about temperature I am referring to excitement, to inspiration, to passion. Are the walls coated in bare and lonely wall paper, screaming for an accent? Or do they have style, and character, born from a thousand tiny details each expressing the inner you?

The energy in your kitchen may come from the cook, but the cook's energy has to come from inspiration. A kitchen devoid of character will not ignite new ideas, and it won't excite the imagination.

On the other hand however, it is quite possible to get too hot. You don't want to be sweating in the salsa. Over stimulation can lead to mistakes, and mistakes usually taste terrible.

So the kitchen ends up being a compromise. You balance hot against cold, energy against calculation, to form the perfect space for creation. And you judge this balance with the best scale available, your own body.

Everyone has an internal temperature, and a psychological temperament. Some people are always excited, always energetic, while others are calmer, and more calculating.

When you are the cook, it is your job to mold the kitchen to suit the emotional needs of your personality. This can be done by balancing your own heat, and energy, against the stimulus in the room. In this way you can invigorate your calm serenity with some exciting colors, or cool off a fiery temperament with some soothing art pieces.

Conclusion: How hot do you want your kitchen to be? Cool as a cucumber or hot as a tamale? The answer is simple, balance the space against your own personal flame.

Looking to add a unique flavor to your kitchen or bar ware set? Each and every stone beverage coaster offered by PebbleArt is made one of a kind by the natural properties which occur within its surface. These features give each piece its own distinct personality and character.

Choosing Exterior Paint Colors

There are many reasons why you may be considering repainting the exterior of your home. Perhaps you are trying to sell your house, your original exterior paint is fading or damaged, or you may just be in the mood for a new look for your home.

New paint can add curb appeal to your house, and if selling, a new coat of paint on the exterior will have a tremendous effect on the value of your home. Remember that, in addition to increased house value, the value of your entire neighborhood will rise with a new exterior paint job.

Choosing the correct paint colors will be critical in determining the final outcome of your decision. In other words, taking the time to consider the effects of your color choices can be the difference between a stunning home and a tacky house.

Color Popularity and Rankings

According to a recent survey conducted by the Rohm & Hass Paint Quality Institute, the most popular color choice of homes across America is white or off-white. Second is beige, tan, or brown with 28% of people claiming those colors as their homes colors. Next is gray, followed by blue, then green and yellow. Coming in last on the list is red and pink.

A similar study conducted by Realty Time Magazine offers slightly different results, with white again having the majority of votes, but followed by gray, then blue, tan/brown, cream, beige, green, yellow, and red in last again. It may be obvious that white is the most common color, because white is actually the color with the most shades (even though white is not actually a color, but a neutral).

Choosing Your Homes Exterior Colors

Prominent Colors of Your Home
There are many factors to take into account when deciding on new colors for the exterior of your home. Firstly, consider the colors that will be remaining on your home, such as the roof color, decks, or any brick or stone walls or structures. Narrow your options first by finding out which colors will go well with these prominent, fixed features.

Surrounding Neighborhood

Next, be sure to take into consideration the rest of the neighborhood. It is typically a good idea to stay within the same relevant context of colors as your neighbors. Remember that your homes color scheme will have a direct effect on the value of your neighborhood.

In fact, some restricted communities, homeowners associations, and historical neighborhoods may have restrictions on what colors you may paint your home, so be sure to research any constraints your community may have.

Mr. Oliver is a marketing agent for N. Chasen and Son. The interior and exterior painting specialists concentrate on painting jobs throughout the Richmond Virginia area. For more information on a painting contractor in Richmond Virginia please visit their website.

Tile And Wood Shingle Roofing

Care For Granite Countertops - Home Tips

Stone surfaces are some of the easiest to maintain and with proper care, your granite countertop will stay looking new for many years.

A Few Things to Remember:

If a spill should occur, clean up before the stain has a chance to penetrate the surface. Granite is somewhat absorbent, and can absorb stains if spills are left any length of time.

Granite is most prone to staining by oil and acid.

Removing diamond rings before cooking is recommended.

Generally, you can clean your granite countertop with a neutral cleaner and a soft clean cloth. Consider using a disinfectant cleaner made specifically for granite. With the growing popularity of granite countertops, these should be easy to find.

Using regular cleaning chemicals on your countertop will strip the seal and leave the porous surface of the granite exposed.

Don't be afraid to call your stone dealer for suggestions on maintenance, care, and cleaning.

If stains and scratches do occur, there are many things you can do on your own to remove them. Here are a couple of examples.

Oil-based Stains (e.g. grease, oil, milk)

Mix a cup of flour, 1-2 tablespoons of hydrogen peroxide with water to make a thick paste. Smear the paste on the stain, cover it with plastic wrap and leave it over night. Scrape away the mixture with a wooden utensil and rinse. You can also remove oil-based stains with acetone, mineral spirits, or bleach or ammonia diluted in water. (NEVER mix ammonia and bleach together!).

Organic Stains (e.g. coffee, tea, fruit)

Food stains like coffee, tea, or fruit juices can usually be removed with hydrogen peroxide, combined with a few drops of ammonia.
Rinse after washing with the solution and dry with a soft, clean cloth.

Non-Oil Stains (e.g. ink, markets, wine)

Use a lacquer thinner or acetone to remove ink or marker stains from darker stone. On light-colored granite, use hydrogen peroxide to these stains. This also works for wine stains. Or, mix molding plaster and pure bleach into a paste and spread over a wine, ink or other non-oil stain. Leave on for 30 minutes, then remove and rinse.

Most people make the mistake of never re-sealing their granite countertops. This needs to be done every year or so in order to ensure a non-porous surface, which will protect the naturally porous granite and help prevent stains and damage. The frequency of applications will depend on the sealer, and the type of stone you have and the extent of your granite countertop use.

Don't let the fear of maintenance for natural stone scare you into avoiding it. There is no substitute for natural stone when it comes to beauty, practicality, and value.

Sealing Your Granite Countertops

Granite is a beautiful and popular choice for your countertops, but knowing how to protect it from damage is important for maintaining its shine and durability. Granite can be rather pricey, so you should make sure to protect your investment. Like all stone, granite is porous. This makes it very susceptible to stains because they can sink into its surface. Also, some granite varieties have small cracks due to natural stresses on the stone during formation.

Without being sealed, granite's porous surface will easily stain and become dull. While resealing granite annually is ideal, it is recommended that you reseal it at least every three years. Sealers act as a guard that prevents liquids and other harmful products from seeping into granite's surface in the first place. Sealing and resealing your granite countertops is not hard to do, and is well worth the work.

It is important to reseal granite before its sealing has expired, but if needed, there is a simple way to check if it needs new sealer. You can take a few drops of water and drip them onto the countertop. If they absorb into the surface, you need to reseal it. If the water beads up, then your sealer is working.

When resealing granite, make sure the countertop surface is clean. You can use soapy water or nonabrasive cleaners to ensure its cleanliness. You should make sure to get rid of all dust as well. There are many sealants on the market, so check with your installer for recommendations.

Although sealing your granite countertop is necessary and can protect it from many harmful products, it will not protect it from everything. Liquids should still be cleaned up promptly, especially oil products. In the case of stubborn stains, it is recommended that you call a professional to help remove it. As always with home repairs, if you have any doubts or questions about sealing and/or resealing your granite countertops, contact your installer for help.

Wood Stair Cleats Problems - Stairway Remodeling

I would imagine most people don't even know what it wood stair cleat is, in construction we have so many words that describe the same thing. A stair cleat is another word for a thread bracket. In other words it's the part of the stairway that connects the stair stringer to the stair step. These have been used for years and over time, most of them will develop the same problem.

Most wood stair cleats loosened up and create a safety hazard. If the stairs are located outside in extreme weather conditions, for example, if it rains or snows a lot, extremely humid humid weather, or extremely hot and dry temperatures, your staircase might not last that long, if it is or isn't maintained properly. It's not a bad idea to use steel or concrete for stairways in these climates.

If you're ever walking up a set of stairs with wood cleats and the stair steps feel a little loose or wiggly, make sure you examined the stair cleats for safety. It's not uncommon for someone to be walking up or down a set of wood stairs and having the stair step or tread giveaway because the wood cleats has loosened.

If the wood stair cleats are nailed to the stair stringer, the nails can loosen up, causing it to become loose, as you walk up and down the stairs applying pressure to the stair cleat, this will create movement in between the stair step and the stair stringer. This could cause the cleat to crack, break and separate the connection between the stair step in the stair stringer.

I would suggest using metal brackets instead of wood cleats. The metal brackets will not crack or disintegrate like some wood cleats. Stair building brackets of course can loosen up and should be maintained regularly.

If you decide to use wood stair cleats, I would suggest using screws instead of nails and drilling holes in the wood stair cleats, most of the time this will prevent cracking the cleat. Try to use a thicker material for the stair cleat, for example using a 2 x 4 with lag screws and washers would be better than using a 1 x 4 with nails.

If you're walking up a set of stairs and a stair step feels loose, contact the owner of the property and let them know, they have a problem with their staircase.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more stair building books and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Warped Shake Shingles

How to Install a Bathroom Faucet

It is important to know how to install a bathroom faucet. If ever your faucet gets broken in the middle of the night, you do not need to call for a repair person or ask on how to install a bathroom faucet. The job is quite easy and all you need is a wrench, elbow grease and these instructions on how to install a bathroom faucet.

First, you have to get rid of the old faucet. Check if the sink has the right number of holes and that they are in the right places. Do not forget to shut off the valve below the sink. Use a wrench in turning the nuts to be able to remove the supply tubes and drain the water. Take away the nuts and the washers and remove the faucet. Do not forget to clean every hole carefully. Read the instructions if you need to do other pre-installation steps.

After removing the old faucet, you are now ready to install the new one. Make sure that you read and understand the instructions included in the faucet. It is necessary to know if you need to do some preliminary set up. Between the faceplate and the gasket, place in the plastic gasket. Make a seal using a plumber's putty if the kit has no gasket included. Do not forget to apply nut and washer below every supply tube and then put together the supply tubes and the shut-off valves.

Follow the instructions in the kit in installing the pop-up device. Many types of pop-up device are available so make sure that you check the instructions. Place in the lift rod and then connect it to the pop-up device. Check for leaks after turning on the water. If there is any leak, take out the part and put a seal around it.

To find more tips about Bathroom Faucet, Bathroom Vanity Design, please visit bathroomdesigntip.com

Home Purchasing Checklists Provide Protection

Home purchasing checklists provide protection for consumers with useful information for future home repairs or current home repairs that will need to be done before the home is sold. Home inspectors often use checklists like these, while they're inspecting the home.

If more home shoppers used home inspection checklist while shopping for houses, we would probably have more satisfied homebuyers than dissatisfied ones. Recently just purchasing a home, we had our real estate professional, the previous homeowner's real estate professional and a mortgage lender, involved in the purchase of the property.

There was a home inspection report from the current homeowners, available for us to look at. It provided us with the damaged parts of the home that were repaired or replaced. Some of these repairs were from termite damage and it was stated so on the report. This was helpful information for us as we walked around the home inspecting it for damage.

The work that was repaired to look satisfactory and the rest of the home had minor damage. Listening to one of the real estate sales people that were involved in the transaction, you would've thought we would get in the deal of a lifetime and they had nothing but good news to say about the product they were representing. I easily understood that, this person could have influenced some one into believing that the home was in great shape, if they didn't have a home inspection checklist with them.

The home had been re-carpeted, painted and was in generally good shape. The problems with the home, were the old windows that were hard to open, the heating unit leaked gas, the tile flooring that ran through the kitchen and a large room addition looked great, except for one thing, they installed the tile over linoleum.

This eventually will have to be replaced as the tile starts to separate from the linoleum. While I'm writing this article, there's about 40 square feet of tile that needs to be replaced, because it's popping up and cracking.

A home purchasing checklist does not guarantee that you will find everything but can't eliminate some of the things that homeowners have the biggest problems with. If you could just eliminate one of these problems, the small price of purchasing, one of these checklists would be worth it.

Home purchasing checklists provide protection for the shopper and I would recommend, never shopping for a home without one.

If your looking for some more home inspection or home building ideas

By Greg Vanden Berge

Who Needs Flood Insurance? - More People Than You Think

If somebody were to ask you the question, who needs flood insurance? The obvious response to that question would be someone who lives in a flood zone. Someone who lives close to the shore in an area known to be at risk for flooding. And while that's true anyone living in an area like that should have flood insurance, it may also be a good idea for people living in lower risk areas to get some flood coverage.

25% of all flood loss claims are filed in areas of low to moderate flood risk. Floods can happen even in areas that you wouldn't think would be at high risk. It doesn't always take a raging river overflowing its banks to cause flood damage. In a strong rainstorm the sewer system and storm drains can get backed up, become blocked, and then overflow. This can cause flood damage in areas where you would least expect it.

When floods do happen in a low-risk area too many people learn the hard way that flood damage is not covered by a standard homeowners insurance policy. To be protected from flood damage you need to carry additional insurance. Fortunately for the people who live in low to moderate risk areas flood insurance can be obtained at very affordable rates. The rates vary according to how much coverage you need and the level of risk.

If you live right on the shore of a river with a history of flooding then you will definitely pay more for your coverage and it may even be difficult to obtain coverage in that situation. If you live in an area of low to moderate risk the cost will be substantially cheaper. In lower risk areas you can get policies that will cover your home and its contents starting at just $119 per year in premiums. And considering that just 2 inches of water inside your house can cause over $8,000 worth of damage an inexpensive policy like this may be a good idea.

Learn the facts about homeowners insurance. How much you need and how to save money on homeowners insurance Educate yourself and protect your home and your financial well being from a potential disaster. http://homeowners-insurance-questions.info

Motorized Shades - Primary Benefits

1. Convenience. Raising and lowering a manual shade is easy enough if it is not too big. But if the shade is very large or there are 2, 3, 4 or more shades then it becomes more difficult and more time consuming. The convenience factors of motorized shades are important for several other reasons listed below.

a. Maximizing Views. Having motorized shades mean the difference between seeing a beautiful sunrise/sunset or missing it. Stunning vistas are rarely missed when opening or closing shades is as simple as pressing a button.

b. Security. Motorized shades can easily be set on a timer so that when guests are away from home for an extended period of time, shades are raised and lowered at various preset times. This gives the impression that someone is living in the house which deters would be thieves.

c. Conserving Energy. The heat gain from sunlight through windows during summer months is a major burden on air conditioning. The convenience of motorized shades makes saving energy much simpler. Preset timers obviate the need to remember to raise or lower shades for energy saving purposes.

d. Protecting Furniture, artwork and flooring. The sun's rays can do damage to interior furnishings, causing fading, cracking or warping. The convenience of motorized shades makes protecting furniture, artwork and flooring much simpler. Preset timers are also useful in this regard.

e. Many Windows and/or Large Windows. As the number and size of windows increases, the case for motorization becomes increasingly compelling. Some walls of windows are 20, 30 or even 60 feet in length which makes motorization a practical necessity.

f. Hard to reach windows. These skylight windows, second story openings or windows blocked by furniture or other obstructions are why motorized shades were first conceived. Obviously, these factors are still relevant today.

2. Child Safety. A shocking number of injuries and deaths result each year due to cords from manual window shades. The window shade industry's "Child Safety Month" is intended to address these hazards with safety clips and consumer awareness. The best solution is no cords at all, which is possible with motorized shades.

3. Unsightly Cords. Aesthetically, cords detract from the clean look of a window opening. Multiple shades mean multiple cords, pooling on the floor when fully open. Motorized window shades means no more unsightly control cords and open, clear views through windows.

4. Less Wear and Tear. Tangling and unfamiliar 'user abuse' to shades are the most common causes of service calls. The control mechanisms on manual shades, if used frequently (see convenience factor above), will break and can be costly to repair or replace.

5. They are cool! Functionally, motorized shades make a lot of sense and aesthetically, they are definitely preferable to manual shades. Let's not forget that they also have an impressive WOW Factor!

The author, Gavin Sword, is an owner of Automated Shading - New York Motorized Shades The company offers Motorized Shades in New York, Florida, (Miami, Naples, Tampa, Orlando), New Jersey and Pennsylvania.

Prevent Pinhole Leaks & Slab Leaks & Conserve Energy by Controlling Your Hot Water Circulating Pump

If you have had 1 leak, more will surely follow - you can do something about it before further damage is done and additional money is wasted.

Circulating hot water is the fastest way to wear out your pipes. In fact 90% of all pinhole leaks and slab leaks happen in hot water lines for the following reasons:

1. Chemicals in water are corrosive

2. Chemicals in water when heated are even more corrosive

3. Chemicals in water when heated and circulated through copper pipes that bend around corners and turn up walls and curve around electrical conduit and sewer pipes and are reduced in size as water passes through a building is extremely corrosive

In order to understand the solution it is helpful to know what causes the problem. With a little insight into how domestic hot water recirculation lines or recirc loops are built and how they work we can see that the answer is as easy as flipping a switch.

Apartments, hotels and larger homes have recirc loops designed to move hot water to the farthest fixture from the boiler or water heater in a reasonable amount of time. Each loop has a pump pushing water through a copper pipe 24 hours a day, 7 days a week. Each loop has multiple joints and fittings that obstruct the flow of water. Gate or ball valves and flapper checks and expansion tanks and whatever else the plumber had on his truck the day he built the line create disturbances in the flow path.

Water likes to flow in a nice straight line with no obstructions. This is called laminar flow - nice and smooth. Anything in the flow path can disrupt the flow and cause an eddy to form. Eddies are the bad boys, the unwanted visitor, the black sheep of the family.

Create a little friction, add in some turbulence and the next thing you know you have a leak.

As your reading this please keep in mind there are things you can do to reduce or even eliminate leaks. They are relatively inexpensive and I'll tell you what they are in a minute.

When water pipes leak many things can happen - none of which are any good. Pinhole and slab leaks, mold, wasted water, wasted energy, property damage, resident/guest complaints and inconvenience all mean one thing.

It cost you time and money.

The only question left is how much? Please refer to Table 1 for an idea of how much a leak can cost.

Table 1: The Cost of a Leak

1 $200 You caught the leak early and it wasn't buried in a wall or under a slab

2 $1,000 The leak was in a wall and you caught it early and it was relatively accessible after tearing out some drywall

3 $2,000 Same as above except you didn't catch it early and mold and light structural damage had occurred

4 $10,000 The leak was underneath a concrete slab but you were able to pinpoint the exact location

5 $20,000 Same as above except you had to chase the leak into another rooms

6 $100,000 + The leak went unnoticed until someone got sick and you got sued

So there is the doom and gloom. What's the solution?

Good question. The answer is there are a number of things you can do. As you go through my list keep in mind that people only use hot water 15% to 20% of the time (based on a study by the California Energy Commission).

First, check your water pressure. 40 psi is high enough for most 1 or 2 story buildings. Be sure to check it in several places to find the lowest pressure in the building. Typically that would be the point furthest from the water meter. If you don't have a pressure regulator, put one in.

When implementing this strategy do it in stages. Drop the pressure by 5 psi at a time and wait to see if you have any complaints. Shower heads and aerators already restrict flow to 2.5 gpm or less. Newer fixtures like the Evolve line of low flow shower heads have pressure compensating technology built into them and work just as well at low pressure as they do at high pressure.

Second, turn off the pump when no one is using hot water. That's right. I said turn off the pump. As I mentioned earlier people only use hot water 15% to 20% of the time. The pump only needs to be on when people need water.

There are 3 methods of implementing this strategy:

1. The Manual Method

2. The Guessing Method

3. The Automated Method

Manual Method

Have someone go to the switch and turn on the pump when you need hot water and turn it off when you are done. Might be practical for a single family home (certainly not convenient) but impossible in an apartment or hotel.

The Guessing Method

Plug your pump into a timer and guess when hot water will be needed. This may be a practical solution if the number of people living in the house or apartment or with a limited number of guests in a hotel and everyone has the same predictable need for hot water. Unfortunately when hot water is needed during an off period the timer gets disabled and never turned back on.

The Automated Method

Think about your recirculation line as a closed loop. When there is no demand for hot water, no water enters or leaves the system. When a hot water faucet is turned on there is a "leak" in the system.

When water leaves the system more water is added from the city water line through a cold water make-up line (this is the technical name for the copper pipe that brings cold water to your water heater).

If a flow sensor is placed in the cold water make-up line, any indication of water movement would mean someone is using hot water.

If the sensor sensed a demand (i.e., someone turned on a hot water faucet) it could turn on the pump. The demand would be met and the pump could be turned off automatically when the demand ended.

That is precisely how an On-Demand Intelligent Pump Controller works. The pump is only on when there is a demand.

As it turns out, there are many benefits to automating your recirc pumps operation:

Drastically reduces pinhole leaks and slab leaks - if the hot water is not moving, it is much less corrosive

Energy is conserved - since people only use hot water 15% to 20% of the time, the pump will be off 80% to 85% of the time. That means the recirculation line isn't full of hot water and no energy is being lost. California Energy Commission studies indicate 37% less energy is consumed when an On-Demand Controller is installed.

Note: A sufficiently high speed pump is required (2,200 rpm or faster) to implement this strategy. If you have a high speed pump you will only need an On-Demand Controller. If not you will need a full system including a high speed pump.

In conclusion, cut your risks, lower your losses, reduce your energy bill and extend the life of you pipes and water heater or boiler by turning off you recirc pump with an On-Demand Intelligent Pump Controller.

Contact me directly at the email address below to find out if this solution will work for you or what other options you might have. To purchase the On-Demand Intelligent Pump Controller click on the link below.

Do it now and sleep better tonight knowing that one of your biggest headaches just got cured.

For information on the On-Demand Intelligent Pump Controller go to http://www.SavesYouEnergy.com

Mark Franklin is CEO of Saves You Energy, LLC a manufacturer and retailer of water and energy conservation products. As a civil engineer Mr. Franklin was involved in the design of multi-family and commercial projects worth in excess of $100 million.

Mr. Franklin has worked with companies ranging from the US Navy to Embassy Suites and Biltmore Hotels to Stanford Student Housing. Pinnacle Properties, United Development Group and ConAm are among the apartment ownership and management companies that have used his products. School Districts like the Blue Valley School District in Kansas and ESCOs such as Johnson Controls have utilized his technologies to reduce energy consumption.

Mr. Franklin can be reached at mark@SavesYouEnergy.com or visit his company's web site at http://www.SavesYouEnergy.com

Plumbing Vent Turn In Wall

Using Fire Rated Glass Blocks to Create Safe and Stylish Windows and Walls

If you've got a 60 or 90 minute fire rating requirement and you're looking to enhance the looks of your building as well what product can you use? Answer - a stylish and contemporary option are 60 and 90 minute fire rated glass blocks. In this article you'll learn the following about these products:

The features and benefits of fire rated glass masonry units
Where to use fire rated blocks.

The features and benefits of using fire rated glass masonry units

The main reason to use a fire rated glass block vs. a standard block is to meet UL ratings of 60 and 90 minutes for window assemblies (a standard block has a 45 minute rating). The following are some additional benefits you'll get with these specialized glass units:

1. Transparency, looks, and light transmission - The blocks are available in Vue (see through) and higher privacy patterns (Endura and Decora from Pittsburgh Corning and Wave from Mulia) and provide 75% visible light transmission.

2. Noise reduction - Fire rated blocks have thicker faces of 3/8", " and 3" of solid glass. The thicker face result in an improved sound transmission class to reduce noise of 53 for Solid Vistabrik glass bricks, and 48 for the sixty and ninety minute rated blocks.

3. Added security- Since the fire rated assemblies are mortared together, and the blocks have thicker faces, they have increased impact resistance and are harder for vandals to break through. The faces on these blocks are 50% thicker for 60 minute blocks and 300% thicker for 90 minute blocks than a standard block.

4. Architectural design flexibility - Use one pattern or combine all 3 patterns to create unique designs with increased fire ratings.

5. Bullet and graffiti resistant - The Vistabrik 3" solid glass blocks and bricks can resist penetrations from high impact weapons with .357 magnum and 9 mm bullets. The non-stick glass surface makes it easier to remove graffiti as well.

Where to use fire rated blocks

Since fire rated glass block windows and walls will generally cost about 50 to 100% more than a standard glass block project (and will visually appear the same to someone looking at your building) they are generally used where the additional fire rating capabilities are either required or desired for additional safety. Here are some of the more popular places this product is used:

1. Limited lot line communities where the side walls of adjoining homes are close together - A project in Columbus Ohio is considering 90 minute fire rated Thickset Decora pattern block for condominium style homes that are 12 feet apart from each other. The fire department requires a 90 minute rated window product and the builder wants to make sure all the rooms are light filled and feel open for prospective buyers.

2. Stairwells in schools, hospitals, parking garages, libraries, and homes - Provides light and the feeling of safety.

3. Windows in gymnasiums, homes, factories and other commercial buildings - The blocks are hard to break with gym equipment or in a harsh industrial setting.

4. Building corridors.

5. Multi unit apartment and condominium complexes - more light gets into each unit without sacrificing the tenant or owners privacy.

As you can see fire rated glass blocks can do much more than simply increase fire safety in a building - they can enhance looks, increase privacy, and make a more secure and safe environment as well.

Mike Foti is President of Columbus Glass Block, Cleveland Glass Block, Mid America Glass Block Cincinnati, Dayton, Akron & Vice President of Eastern Glass Block New York & New Jersey - nationwide factory direct suppliers of fire rated glass block for security and safety. Mike's companies also professionally supply and install glass block windows, walls, and showers.

Nationwide 877-668-5888

http://www.columbusglassblock.com/products-security.aspx fire rated glass blocks for safety & security.

http://www.columbusglassblock.com/ - glass block windows, walls, showers, and colored glass block.

Consulting

Granite for Bathroom Counter Tops

Granite is commonly chosen for all types of projects within the home for many people across the United States and the world. It is used all the time when remodeling and can add that finishing touch to whatever part of the house that you want. One place that granite does well in the home is in the bathroom. You may wonder why granite may be chosen for the bathrooms, but there are actually a couple good reasons to have granite for bathroom counter tops. Many new homeowners like the look and feel of granite; it makes things look pure and elegant when the granite shows through in the bathroom counter tops. Additionally, granite for bathroom counter tops is a good idea because it will not take as much effort to clean as it would in another part of the house like the kitchen.

How can granite be used for counter tops in the bathroom? Many people actually line the whole bathroom sink and counter top with granite, making it the material of choice for all the bathrooms inside the house. Also, aside from having granite for bathroom counter tops, granite is also sometimes chosen for the floors of the bathroom as well. One of those reasons is that the bathroom is typically not the place where many spills or drops take place, thus making the bathroom a perfect place for granite material as well as bathroom counter tops made of granite.

Cleaning when you have granite for bathroom counter tops can also be very easy. When the granite bathroom counter tops are installed a sealant will probably be placed over it. By using a finishing polish on the granite bathroom counter tops you are ensuring that it continually looks nice, clean, and beautiful. The major reason that granite is used for bathroom counter tops is that the material is easy to clean. But even if anything small does happen to your granite bathroom counter tops, you will certainly be able to clean them yourself very easily by using a piece of fine steel wool or even calling in a professional to make your granite bathroom counter tops look beautiful again

Joseph Walker is webmaster of http://www.GraniteCounterTopsGuide.com a free informational site that helps to inform you about Granite Countertops and what to look for and how to take care of them.

Room Additions

Hire a Local Qualified Home Inspector to Do Your Home Inspections

Did you know that a newly constructed house needs aresidential inspection performed on behalf of the home buyer? Even buyers of older homes often forget to have a home inspection or even know they can require a home inspector as a part of the pre-purchase process. Failing to have the inspection performed can relieve the seller from liability with any needed repairs, and leave you holding the money pit.

Did you know that a house inspection from a professional will usually consist of over 2500 different items being looked at. It is our job to completely evaluated almost all systems of the house from the roof all the way to the basement or crawlspace. Certified home inspectors have demonstrated their ability to locate structural issues, HVAC problems, plumbing and electrical issues, and even issues outside of the home that may have been missed even by the local building inspector. The cost of a home inspection is very low compared to the cost of almost any missed repair issues.

In areas like the humid Atlanta region there are issues such as water leaks, black mold, HVAC condensation, and leaching that may not be applicable in other areas. In fact each area of Georgia is different so if buying a home in North Georgia it is important to work with a reliable residential inspection specialist who has experience in the North Georgia area. After all, would an inspector from South ofAtlanta know how to look for roof damage caused by snow on a home in Ball Ground? Not likely. Keep it local and find a home inspector to provide a home inspection on your nexthouse or investment property. Every area has it's own set of issues related to the climate alone.

David Lelak is the owner/home inspector for IHI Home Inspections in Atlanta, GA. He is a Certified Atlanta home inspector, a member of Nachi and has been in the residential construction industry for over 20 years. My job is to protect one of the biggest investments you might ever make. So when I do a home inspection I inspect the property as if I were purchasing it for me and my family. Your families safety is my biggest concern and I want customers for life. Visit my website today at http://www.ihihomeinspections.com to schedule your inspection online.

Editorial services provided by my friend Ken Cook http://www.icobb.com

Electrical Outlet Problems

Bathroom Decorating For A Zen Like Spa Look

Bathroom decorating can be fun and challenging but when it ends up giving you the relaxing feeling of a Zen like spa it is well worth the effort. Here are some tips on how you can get this relaxing feel in your bathroom

You should use soft colors and neutral tones colors for your Zen bathroom. Matching colors with your wall paint, towels and shower curtains is key so get paint cards that have your paint colors on them and bring them shopping with you when you buy your bathroom accessories - that way you will get a perfect match.

In the bathroom, consider accessorizing with artwork on the walls, as well as toiletry and toothbrush holders, towel racks, towels and decorative soaps. You want to end up with a minimalist look so don't put too much in. Consider sleek designs for the hamper and wastebasket.

If your bathroom is big enough it could include shoji screens, plants and furniture with simple lines as well as a table water fountain and some bamboo. Window treatments for the Zen bathroom decorating theme should be simple and plain. Try updating your windows with bamboo blinds. After you get the ideal look on your windows, you might realize the walls are drab by comparison. To overcome this, try hanging watercolors or oriental silks in frames around the room.

While you may not think about it much, flooring plays a vital role in your interior design style so putting in bath mats to compliment your Zen decorating theme can really improve it's style. The best type of flooring for the peaceful and serene style is organic woven mats which you will want to purchase in neutral tones.

For some decorative touches which will help tie together your Zen decor think about a lotus bowl with 1 flower, rice paper lamps, and Asian pottery to accent your room design. You could also add towels that match your wall colors rolled up and stacked in a bamboo basket just like you might find at the spa.

Your Zen bathroom decorating theme can be a snap if you take the time to plan it out adequately. Simply buy the pieces on your plan and put them in place - your room with have the feeling of a peaceful spa before you know it.

Visit http://bathroomdecoratingguide.com for more great tips on decorating your bathroom in a variety of popular bathroom decorating styles.

Long Dryer Vent Problems

New Versus Old Lumber - Structural Failure

During my 30 years of remodeling and building new homes. I have ran across quite a bit of structural framing failures. I find myself answering this question a lot when explaining to a homeowner about the structural failure I am repairing on their home, "Why Didn't They Use Better Lumber" or " Why Didn't They Use Larger Lumber." I really have a hard time answering these questions because I honestly don't know the answer.

However I can try to use some logic and reason to give these people an answer that seems to make sense to both of us. Why didn't they use better lumber, quite simply because, with most older homes that were built before the 1970s they actually do have better lumber. Now you're probably thinking how can these homes have better lumber when the lumber is old versus the new lumber used in a brand new house.

Most of the structural repairs I have made over the years has nothing to do with the lumber and whether it was new or old. A large number of these repairs were caused by neglect and poor maintenance.

The lumber in most older houses are from older growth trees. Some of these trees were extremely large and only the premium parts of the trees were used. The premium lumber is cut farthest away from the center of the tree. Now the larger the tree it makes sense that there will be more premium lumber.

A large majority of the newer lumber used in home construction comes from trees about 6 inches in diameter. Now you're probably wondering how can they cut a 2 x 8 piece of lumber out of a 6 inch tree. Of course they cannot, the larger lumber comes from larger trees.

Most 2 x 4's that are less than 8 foot long can be cut from these trees. This scrap or waste that comes from cutting these two by fours will now go into engineered building materials like particleboard, oriented strand board and engineered beams. Another name for an engineered been would be a paralam.

I hope you're starting to get the picture now when it comes to using new or old lumber. There are companies that are going into old logging rivers and retrieving old growth lumber. These were logs that sank to the bottom of the river's and were never retrieved because it was too costly.

The old growth lumber is quite expensive. Who's to say what problems we will happen in the future from the newer products created with modern day technology. When it comes to building houses it is not an exact science and as contractors we have been repairing the damage from poor engineering for years.

When I use the word poor engineering I am not pointing fingers at engineers. We now have more knowledge about home construction then we had years ago.

New versus old lumber, who wins the battle. Only time will tell.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on building and remodeling your homes and Structural Repairs.

Hiring a Contractor For Bathroom Remodeling - Remodeling Contractors

Well here's the age old question, how do we go about finding a decent bathroom remodeling contractor.

Here's some things you will be looking for in a contractor.

1. Is Your Contractor Fair and Honest?

2. Does Your Contractor Have Experience Remodeling and Designing Bathrooms?

3. Can You Actually Find a Contractor Who Will Complete the Job in a Timely Manner?

4. Do You Think the Workers Will Be Able to Clean the Job up Daily?

5. Will the Contractor Show up on Time?

6. Is the Contractor Going to Work At Least Eight Hours a Day?

7. Does the Contractor's Crew Have Experience?

8. Is Your Contractor and His Crew Courteous?

If you find a contractor for your bathroom remodeling project that has answered yes to all questions above, hire that person immediately. Most contractors can sincerely answer yes to half of the questions above. If you're looking for the ultimate bathroom remodeling contractor, you could be searching for quite a while, you're looking for some one that is competent and you feel comfortable with.

When hiring a contractor, look for someone who has your interest in mind first and not theirs. Find someone who is willing to help with the designed process of your bathroom and the remodeling. If you find a contractor to be arrogant or controlling, there is a good chance, your bathroom might not turn out the way you envision it.

When hiring a contractor for your bathroom remodeling project or any home improvement project, the most important thing to keep in mind is, whether or not you feel comfortable with this person or not. Never hire a contractor you're not comfortable with.

If a contractor is referred to you by someone you trust, this does not guarantee you will be happy with the bathroom remodel. Most referrals that I have gotten over the years are like rolling the dice, I believe I would have done just as good picking a name out of a hat.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Corner Of Hot Moped Shower

Stair Building Books

Where do we go to buy stair building books? Do we go to the major retailers like Amazon or Barnes & Noble? I have found over the years the information in most of these books I have purchased from these stores has a lot of fluff with very little common sense stair building application.

I bought one stair building book that had information on handrails. The front cover looked great and I thought this was going to be a great book reading the reviews from Amazon. When I finally got the book in the mail, I would say about one third of it was math tables for building elaborate wooden hand railing's. These tables were not easy to understand along with the rest of the book.

Back when I bought the book on building stair handrails it dawned on me that most of the construction workers I have met during my 30 years of working in the field were not very good outside of basic math. Now I knew a lot of carpenters that could read a measuring tape and use a framing square pretty good. But when it came to advanced geometrical construction projects like a stair hand railing system this was out of our league.

Reading this book or should I say parts of it gave me an idea to write a book of my own, starting with basic stair building I took all the fluff or the hard to understand advanced stair building applications out of my book, How to Build a Straight Set of Stairs.

I put a lot of time into creating an illustration for every possible part of building a simple set of stairs. I have probably built over 2000 sets of stairs during my lifetime and have explained and taught basic and advanced stair building to other carpenters. Understanding what parts of the stair construction process they understood, I was able to improve my skills as a stair building teacher.

Most people do not need advanced stair building skills to construct a simple straight set of stairs. If you are building a straight set of stairs and would like a stair building book with lots of easy to understand illustrations along with simplified directions you have found it.

We're building more stair building books to help contractors, carpenters, handymen and homeowners understand the stair building process.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs books and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Plate Strap On Bottom Wall

Fixing a Speaker Cabinet by Replacing a Home Theater Speaker

When it comes to great audio sound, there is no part of a home theater that is more overlooked that the speaker cabinet. It is the very last link in the sound chain and controls the final way you hear everything. The speaker cabinet reproduces the tone as sound waves in the air which creates the subtle differences in sound. What happens when you have a blown speaker in one of your cabinets? Do you fix it or just buy a new one?

Usually the answer to this question is a wholehearted yes, simply for the reason that those cabinets were built with your speakers in mind. That is what they designed for. Think about the amount of math and engineering that was involved in building the cabinets with a certain amount of air space in mind. These cabinets were tuned specifically for those old speakers. Installing other speakers in there will not sound the same as your old speakers.

Here is a simple step by step process how you can remove the bad speaker from the cabinet and repair it.

• Take the speaker cabinet you'll be working on and set it on its back to remove the speaker grille. Some grilles are different than others. Some simply pop into place, while others are secured in with screws visible from the side or front of the cabinet.
• Now that you have the grill removed, you'll next unscrew the first screw from the bad speaker, and then the screw opposite the first one. All of the screws need to be removed in an opposite pairs order.
• Now, carefully list the speaker out of the cabinet. It will still be connected by wires to the other speakers and the head unit. Some are attached by two wires while others by four. There should never come a time when you remove a speaker and there is only one wire. If this you see this is the case then you may be lucky and the speaker is just disconnected and not blown out.
• Now take those wires hanging out the back and pull them out of the speaker tabs using the plastic connectors. Never pull on the wire itself. You'll end up damaging it. Those tabs should be color coded to help you distinguish between the positive (red) and the negative (black) wires. If they aren't, then simply label them with a marker before you remove them. Be careful not to let the wires fall back inside the cabinet once they are removed by taping them to the sides.
• Double check that the removed speaker is in fact blown and dead by determining the resistance between the two positive and negative connection tabs. If you get a read out on the meter of less than an ohm or more than twice the impedance rating, you have yourself a bad speaker. If you get a reading between the two good zones, then there shouldn't be anything wrong with the speaker. One other way is to lightly press on the center of the speaker cone. The speaker is blown if it makes a scratchy sound or does not spring back to its original shape.
• Now that you have your new speaker ready to go, you'll need to reconnect the wires by pushing the connectors onto the matching tab. Set the speaker into the mounting hole and replace the screws in that same opposing pair fashion as used earlier.
• Lastly, you are going to tighten all those screws, replace the grille and return the speaker cabinet back to its upright position.

Electra Warehouse does not only offer mobile electronics, it also carries brand named pro DJ equipment and home audio equipment. Electra Warehouse strives to give each customer a great one stop shop for the best bargain mobile, home and pro dj electronics. Visit them at http://www.electrawarehouse.com.

Home Organization Books

Tuscan Decor in the Guest Room

If you have a guest room in your home, then it's there for one main reason - to make your guest feel at home while they are visiting.

Of course, any visitor will be spending most of their time with you, in the living room or traveling about the local area, but they'll want a place where they can retreat during the day to rest, as well as a place to retire in the evening - a little slice of home away from home.

In order to give your guest room that Tuscan look, there are a few items to consider.

Lighting

The lighting fixtures are important. Remove those shiny, modern fixtures of aluminum, and replace them with rustic designs - wall sconces of wrought iron, for example, or other types of metal with a distressed look to simulate age, with the decoration as scrollwork simulating grape vines.

Windows

Direct sunlight, over the course of time, will fade and damage fabrics and furniture, nevertheless it's always nice to be able to spread open the draperies to allow sunlight to flow into a room. For the Tuscan look, don't use a lot frills. Use plain draperies, with plenty of fabric gathered today, in shades of beige or brown or gold, so that their hues can be enhanced by the sunlight.

The Walls

Wall color is important as it gives the overall tone of the entire room. Golds and browns are popular colors, but what particularly evokes the feel of Tuscany is to give the walls an aged patina by using faux paint to make them resemble old, crumbling brick or plaster.

The Floor

For a true Tuscan look, aged hardwood floors, marble or tiled floors are a must. However, these types of floor can be expensive, and for a guest room that is only used once or twice a year, it may be an expense you don't want to incur. However, plenty of throw rugs with Tuscan designs scattered around the floor can give the appropriate feel as well.

Tuscan designs? Where are you going to get those? Easy - surf the web for Tuscan rugs and you'll find a vast array of authentic Tuscan designs.

Furniture

The bed, of course, is the main piece of furniture in the guest-room. No modern bedsteads with gleaming metal - choose wooden bedframes, ornately carved with bunches of grapes, for example, The blankets, bedspreads and pillows on the guest bed should be of dull colors invoking the earth or sky tans, browns, golds or blues.

If possible, the bookcases, bureaus and wardrobes and other furniture in the room should be of wood as well, very light or very dark-colored woods to give a sturdy, aged look. Antique furniture will give the appropriate look.

Accessories

The look of Tuscany is the look of the land - a land with rolling hills, vineyards, a vast blue bowl-like sky, and farmhouses that have been there for centuries. Accessories should call out this atmosphere of permanence - majolica or ceramic pottery, wrought iron candle holders, and so on.

Adam Peters is the author and editor of many wooden shutters articles and newsletters published at http://www.home-decorating-reviews.com Find more publications about tuscan decor at his website.

Advantages of Framing With Steel Studs

I have heard all sorts of stories over the years of the advantages in framing with steel versus wood studs. One time I even heard you could build an entire house with the amount of recycled steel from a large automobile such as a Cadillac. I find this hard to believe unless you're building a very small home.

My personal favorite for framing with steel studs is that they are extremely straight. I have built nonbearing partition walls using 12 foot 3 1/2 inch wide steel studs and after the drywall you can lay an 8 foot level to check it for straightness on the wall with amazing results.

If you use 3 1/2 inch wide steel studs with 5/8 of an inch drywall you will get an extremely durable and sturdy wall. Framing was steel studs is common in office renovations or remodeling. Most of the steel stud framing is done via the drywall contractors.

Steel studs and termites do not mix. You'll never have to worry about these little buggers or other uninvited house pests damaging your walls.

Over the years I have heard stories that steel framed buildings are earthquake and fire proof. They might be more resistant to fire than wood but keep in mind when metal is hot enough it will bend and warp making it unusable.

When I hear people talking about a fireproof building built with metal framing components my first thought is all of the other materials used in building the house that are not fire resistant. Don't get a false illusion when buying a house framed with steel studs and think it is 100% fire proof.

As far as steel framed buildings being earthquake proof this is another story. I really can't comment too much on earthquake damage to a steel building. The problem with earthquakes is they seem to create fires. So even if you're building does survive an earthquake it could get damaged by a fire in the area.

I have framed more wood homes than steel homes over the years and my steel stud construction is limited to nonbearing partition walls usually located in office buildings. I love framing with metal because of its light weight and ease of construction.

I still love framing with wood. There is something about what framing that I have always loved and always will.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as

well as the weekend warriors. He is currently working on more Building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on House Framing Ideas

Basement Flooring

Basement flooring is an important component of a finished basement. When deciding upon the appropriate basement flooring for your basement remodeling project, it is extremely important that you first determine whether or not you have a moisture barrier underneath the basement floor. If you do not have a moisture barrier underneath the concrete slab then you will have high moisture levels that will wick through the concrete floor to the basement flooring.

To check if you have a moisture barrier underneath your basement's floor, cut open a few plastic trash bags and lay them in a few different places on the basement floor. Spread them out on the basement floor and tape them down. After a couple of days remove the plastic trash bags from the basement floor and observe if they are wet on the bottom side. If they are, chances are there is no moisture barrier underneath the basement concrete slab. If this is the case, your basement flooring choices are more limited.

It is possible, however, to increase your basement flooring choices by applying a basement waterproofing sealer to the basement floor and to the walls. You can also have a French drain installed around the basement foundation; however this is an expensive endeavor as it will require excavation, gravel and PVC pipes to be installed.

If it is determined that you do have a moisture barrier underneath the basement concrete slab then there are a number of flooring choices to choose from.

Basement Flooring - Carpeting

Though not the ideal basement flooring, carpeting is frequently used in basement remodeling projects. Berber carpeting seems to be quite popular today due to its durability and comfort. Carpeting can be installed even in cases where it has been determined that a moisture barrier was not installed below the concrete slab. A cellulose underlayment can be installed on the concrete floor, prior to installing the carpet padding and carpet to provide a moisture barrier.

Carpeting is great for absorbing sounds that are typically found in a basement, such as furnaces turning on and off, and water running down drain pipes.

Basement Flooring - Free Floating Engineered Flooring

Engineered flooring is ideal for basements, as it floats on top of a foam underlayment that is first placed on the basement floor. The foam underlayment helps to mitigate unevenness in the basement floor and also helps to reduce sound. The engineered flooring floats on this underlayment and can effectively breathe with changes in the basement's moisture levels.

Engineered flooring is also ideal for basement flooring due to its construction. It is constructed of several layers of wood materials, which helps to stabilize the flooring from warping or twisting. The top layer is usually an attractive wood veneer finish that really gives the look of a solid hardwood floor, but without the concerns of damage due to high moisture levels.

Basement Flooring - Laminate Flooring

Like engineered flooring, laminate floats on an underlayment. Laminate floors have a wood based core and a photographic resin layer based surface that resembles a hardwood floor or vinyl floor look. Laminate floorings need to be installed in dry basements with low moisture levels, as it is possible for laminate floors to delaminate if they come in contact with water.

Laminate and engineered flooring are both designed to be installed by the do it yourself homeowner.

Basement Flooring - Ceramic Tile Floors

Ceramic tile floors are also another excellent choice for basement flooring, however they can be cold on the feet. It is also important that there are no moisture issues with the basement as this could negatively impact the life of the ceramic tile. In addition, it is important that the basement floor is level prior to installing the ceramic floor tile. A leveling grout or mortar may need to be applied on the basement floor before installing the ceramic floor tiles. Also, it is imperative that any basement floor cracks be filled in and sealed as ceramic floor tile has a tendency to crack along basement floor cracks otherwise.

Painting Basement Floors

An inexpensive alternative is to apply a couple of coats of paint to the floor. This is typically acceptable in a low-end basement remodeling project, and it may be the only sensible thing to do if there are concerns of high moisture levels or if there is the threat of the occasional flood.

You can fancy it up a little bit by adding two color tones and or creating interesting patterns.

Basement Flooring - Hardwood Flooring

Hardwood flooring should not be considered as a basement flooring material. It is very susceptible to high moisture levels and can not come in contact with water. If it does, the wood will warp and quickly become ruined.

For more help on Finishing Basements and Basement Flooring, see HomeAdditionPlus.com's Basement Remodeling Bid sheet.

About the Author: Over the past 20+ years Mark Donovan has been involved with building homes and additions to homes. His projects have included: building a vacation home, building additions and garages on to existing homes, and finishing unfinished homes. For more information about Home Improvement and Home Additions, and Home Remodeling and Repair, visit homeadditionplus.com and http://www.homeaddition.blogspot.com

Masonry Books